Fire-Rated, Watertight, Seismic and Large-Gap Deck Expansion Joint System For Plaza, Split-Slabs, Stadium Concourses and More

Uses

  • Fire-rated plaza decks
  • Fire-rated podium decks
  • Fire-rated, split-slab decks
  • Fire-rated, split-slab parking decks
  • Fire-rated, split-slab seismic joints
  • Fire-rated, split-slab stadium concourses
  • Fire-rated, split-slab airport roadways
  • Mall bridge connectors
  • For eliminating leaks over fire-rated occupied spaces

Product Highlights

  • Built-in fire-rating up to 2 hours
  • UL 2079 certified
  • Meets the requirements of ASTM E1966, ASTM E119
  • and ASTM E1399
  • Watertight–side flashing sheets integrate with buried deck waterproofing
  • No fire blankets or gutters needed
  • Traffic durable
  • ADA Compliant
  • Sound dampening
  • No invasive cover plate anchors
  • Installs entirely from deck or floor above
  • No utility lifts or holding labor required
  • No obstructions at columns or under-slab obstructions from HVAC, electrical, plumbing or mechanical materials
  • Self-locating plate anchors
  • Installs in new or retrofit conditions

The SJS-FP-FR System is designed to provide a watertight, trafficable joint system in large 4-inch (100mm) and larger joint openings, in decks of split-slab design. SJS-FP-FR is a fire-rated system that expands the use of the SJS System to waterproofed split-slab deck designs through the use of structural-slab mounted supporting legs with integral waterproofing side sheets that integrate with the deck waterproofing membrane.

As with the SJS System and the SJS-FP systems, it is designed for larger trafficable joints, often found in seismic applications. The aluminum (or stainless steel) coverplate provides a durable and high-load bearing surface. The SJS is constructed from two horizontal joints pre-assembled in parallel adjacent to a heavy-duty extruded aluminum spline. The spline acts as a receptor for attaching the surface-mounted traffic plates that bear vehicle and other loads. The result is a system that offers features and benefits not found in alternative products intended for large, horizontal structural joint gaps.

Sizes

4″ to 10″ (100 – 250mm)
Note: can be used to straddle joints 1-inch (25mm) and larger-consult EMSEAL

Product Depth

Foam/spline assembly is 6-inches (150mm) deep. Finished depth will depend on FP leg height.

Colour

Standard cover plate is aluminum with ADA-compliant, sand-blasted finish. Stainless steel also available.
Other finishes by request

Movement

Up to 100% Total (+50% and -50% of nominal supplied size.)